안전놀이터

안전놀이터추천 What should be Kept in Mind While Designing a Kid’s Playground

Nowadays, the playgrounds we see in schools 메이저 안전놀이터추천 and public access parks are constructed with pre-planned designs with strict criteria which have to be fulfilled. The playground construction depends on different factors, consisting mainly of the design settings and the locality. Various settings are there for distinguishing the playgrounds in schools, shopping centers, parks, and various spaces of public access. It is no surprise that different guidelines are followed while building a new playground. It must be noted that guidelines need to be followed for any playground which is renewed or is newly designed.

 

Let’s look into what goes into the build and the design of these playground structures. A few general principles are followed that are considered by developers while designing and manufacturing an effective playground 안전놀이터추천 가입.

 

  • The fun playground must also be safe: safety can be considered as the most vital factor when it is about the children but to make a playground quite safe is also a lot more difficult. Some factors to be considered are:

 

  • Some playground locations account for pollution or dangerous traffic. Thus proper supervision must be there for the same. The sizing and materials should also meet the regulations of the area through knowledge of federal and local codes with the means of adhering to them.

 

  • Natural Settings must be enhanced: The best kids’ playgrounds are the ones where most of the location can be efficiently utilized. In rural settings, local plants can also be placed for surrounding local materials and playgrounds and can be used within the playground. In urban areas, a playground can be built with sleek materials complementing cityscapes.

 

  • Playgrounds must also engage the senses of kids: A fine playground 더 알아보기 must also assist in engaging kids on sensory levels like smell, sound, sight, touch

 

  • Changes for the Kids: In the playground kids must get opportunities for testing their physical activity capabilities. This implies areas that are rough to climb, along with places for engaging in sports along with other games.

 

 

Important Design Aspects to Follow

There are two general aspects that must be dealt with while designing a playground: Making safe playground floors and equipping it with all necessary structures. The former issue often gets overlooked, despite the fact that it is the playground flooring that has a deciding role when the kids fall down. The general cause of accidents is falling down the playground! Natural soil or grass is typically not ideal for cushioning the impact of the fall of a kid.

 

Another factor is the equipment and here it’s best to avoid doing things according to the budget. Obviously, the current equipment must be used when it is regularly maintained and is in good condition. While purchasing new equipment, people must select a reliable manufacturer, whose equipment also complies well with international standards of safety. The manufacturer must inform you about the equipment that must be installed in a DIY manner, and what must be carried out through a professional company.

 

Calculating the 검증된 안전놀이터추천 Playground Area

It’s best, to begin with designating a safe playground area, which must be large for not only fitting equipment but also for encompassing the area of impact. The kid becomes more vulnerable to falls in this area. Remember that the area of impact must be free of all obstacles. For calculating the area, we must know about the critical height of the fall of the equipment. For example, when the maximum height through which a kid falls is 2m, the ground should be covered with protective flooring for attenuating impact from 2 meters. Moreover, the flooring must reach 1.8 m behind the equipment edge.

 

Preparation of the Playground Subfloor

After looking at the location of the current equipment or the installed new one (following instructions of the manufacturer) and after you’ve designed the total area of the playground, you must prepare the subfloor. If you’re building a DIY playground it is simple when the subfloor gets bound (e.g. paving stone, concrete, tiles, asphalt). In such a case, you should also lay the safety flooring directly on top of it, without preparing the base course. If you’re selecting rubber playground mats that interlock, you’ll also have to glue tiles.

 

When the subfloor gets unbound, for example, it is sand, g 온라인바카라사이트추천 rass, or soil, you should firstly prepare for making it solid and load-bearing. The most economical and best ways are preparing gravel or grit bedding for the floor. Level the current area while placing a layer of around 15 cm sharp-edged leveled and compact gravel. Now it is possible to pave safety mats directly on gravel bedding. The rainwater seeps through porous playground mats and then through gravel layers to the ground. The solution is practical and ecological – there won’t be any puddles and the kids would also be able to make use of the playground in all weather!

 

Low Maintenance Flooring on Playground

The most practical flooring options are rubber mats to get safe DIY playgrounds. Besides the fact that they’re simple to install, they also don’t require too much maintenance. The playground mats are made through elastic material (polyurethane-bonded rubber granulate) meaning that they’re totally weatherproof.

 

In any problem, the individual mats can be exchanged or lifted as well. O 보글사다리1분 ther materials of the playground are difficult or expensive to maintain. Mainly when grass, sand, or wood chips require maintenance constantly. The expenses related to it can be overwhelming for any neighborhood or community. Mainly the layers of all the loose-fill materials have to be thick enough for providing protection against fall.

 

Looking from the Kids Perspective

With rubber playground mats it is simple to get the necessary fall protection on a playground 안전놀이터추천 토카스. Unfortunately, it is common to see playgrounds that are exciting to the adults but don’t draw much attention from the kids. For developing and customizing a playground it’s best to know from the perspective of kids how they would want their playground to appear. Sometimes they can come to great conclusions and at other times their ideas would be quite extreme for implementation, often there are things for including in the design.

 

Also, when implementing playground design, safety must be the first step. Playground safety dramatically increased over the years and it isn’t passive anymore. Manufacturers always consider safety and the people visiting the park need not worry. While the equipment and surfacing can offer a safe environment, it is also imperative that proper supervision must be there. While surfacing and equipment can offer an environment for safe play, it is quite vital to have proper supervision as well. All these factors, combined together make a great playground area for kids and adults as well.